4601 S Graham St, Seattle, WA 98118 Mon-Sun 7am-9pm  |  24/7 Emergency Service

Garage Door Cable Repair & Replacement

Lift cables work with your springs to raise and lower the door. When a cable frays, slips or snaps, the door can hang crooked or drop. We replace cables and rebalance the door safely.

  • Same-day service available
  • Family-owned & operated
  • Upfront, honest pricing
  • 24/7 emergency repairs

Request Service

Tell us what's going on. We'll call you back fast.

No spam. We only use your info to contact you.See our privacy policy.

Garage Door Cable Repair & Replacement

Technician checking a garage door lift cable at the bottom bracket

Garage door cables run from the bottom corners of the door up to drums or pulleys, and they're under constant tension. Damp Pacific Northwest air can rust cables over time, and a worn cable can snap or slip off its drum, leaving the door lopsided or stuck.

Because cables are connected to the spring system, replacing them requires releasing and resetting spring tension. Our technicians handle this safely, replace both cables so they wear evenly, and check the drums, bottom brackets and springs while they're there.

Safety first: If a cable has snapped or come loose, don't operate the door. Running it with a broken cable can bend panels and tracks, or cause the door to fall.

Signs of cable trouble

  • Frayed, rusty or kinked cables
  • Door hangs lower on one side
  • Cable hanging loose beside the door
  • Door jerks or shudders while moving
  • Door went off track after a cable slipped
  • Bottom brackets are bent or pulling away

Not sure what's wrong?

Describe the problem and we'll help you figure it out.

Call 206-423-2643

Cable services

Cable replacement

New galvanized lift cables sized for your door.

Re-spooling

Cables that slipped off the drum reset and re-tensioned.

Bottom bracket repair

Rusted or bent brackets replaced where cables attach.

Full rebalance

Spring tension adjusted so the door lifts evenly.

Our process

  1. Secure the door: We lock the door in place so it can't move while we work.
  2. Release tension: We safely unwind spring tension from the system.
  3. Replace cables: New cables are installed and wound evenly on both drums.
  4. Rebalance & test: We reset tension, level the door and test full travel.

Serving your area

We provide cables service throughout Seattle, Bellevue, Tacoma, Marysville and communities across Snohomish County. See all service areas.

FAQ

Cables FAQ

Why did my garage door cable snap?

Most cables fail from age, rust or friction against a worn drum or bracket. A broken spring can also cause a cable to come loose suddenly.

Do you replace one cable or both?

We recommend replacing both cables at the same time so they wear evenly and the door stays level.

Can I still use my door with a loose cable?

No. Using the door can cause it to go off track or fall. Leave it closed and call us.

Garage Door Stuck? We Can Help Today.

Call now for same-day service across Seattle & Snohomish County.

Call NowFree Quote