Garage Door Drum Repair & Replacement

Cable drums are small parts with a big job. They're grooved so the cables wind neatly as the springs turn the shaft. Over time grooves wear, set screws loosen and cast drums can crack, especially after a spring or cable failure.
When a drum fails, the cable may unwind or jump off, causing the door to hang unevenly or jam in the tracks. We replace drums in matched pairs, reset the cables and springs, and make sure everything is locked down and balanced.
Signs of drum problems
- Cables bunching or overlapping on the drum
- A cable keeps slipping off on one side
- Visible cracks or worn grooves on the drum
- Door sits uneven when closed
- Clicking or grinding near the top corners
- Loose set screws on the torsion shaft
Not sure what's wrong?
Describe the problem and we'll help you figure it out.
Drum services
Drum replacement
Matched drums installed for your door height and lift type.
Set screw & shaft check
Drums secured to the shaft so they can't slip.
Cable re-winding
Cables wound cleanly into the drum grooves.
Hardware inspection
Bearings, center bracket and shaft checked for wear.
Our process
- Inspect: We check drums, cables, shaft and bearings.
- Secure & unwind: We lock the door and release spring tension safely.
- Replace drums: New drums are fitted and cables re-wound.
- Balance & test: Spring tension is reset and the door is tested.
Serving your area
We provide drums service throughout Seattle, Bellevue, Tacoma, Marysville and communities across Snohomish County. See all service areas.



